| 保质期 | 12（个月） |
|---|---|
| 产地 | 河北衡水 |
| 工作温度 | 0-45（℃） |
| 功能 | 密封 |
| 销售方式 | 直销 |
| 用途范围 | 建筑 |
| 有效期 | 24个月 |
| 粘度 | 10 |
| 执行质量标准 | 国标 |
| 贸易属性 | 内贸 |
| 分类 | 密封胶 |
| 粘合材料类型 | 橡胶类 |
| 发货期限 | 3天 |
| 树脂胶的分类 | 聚氨酯胶 |
| 热熔胶类型 | 包装热熔胶 |
| 品牌 | 瑞博 |
| 型号 | SGJL |
| 粘合材料 | 金属 |
| 固化方式 | 室温固化 |
欢迎来电：131 6657 0832
聚硫密封胶是以液态聚硫橡胶为主体材料，配合以增粘树脂、硫化剂、促进剂、补强剂等制成的密封胶。此类密封胶具有优良的耐燃油、液压油、水和各种化学药品性能以及耐热和耐大气老化性能。
Polysulfide sealant is a kind of sealant made of liquid polysulfide rubber, which is made up of tackifier resin, vulcanizing agent, accelerator and reinforcing agent. This kind of sealant has excellent properties such as fuel oil, hydraulic oil, water and various chemicals, as well as heat and atmospheric aging resistance.性能
performance
1、此类密封胶具有优良的耐燃油、液压油、水和各种化学药品性能以及耐热和耐大气老化性能。
1. This kind of sealant has excellent properties such as fuel oil, hydraulic oil, water and various chemicals, as well as heat resistance and atmospheric aging resistance.
2、具有良好的柔软性、低温饶曲性及电绝缘性。
2. It has good flexibility, low temperature, bending and electrical insulation.
3、对大部分材料都有良好的粘附性。
3. Good adhesion to most materials.
classification
一般为可硫化型。按组分可分为双组分(或三组分)和单组分型。其加工采用预混-研磨-灌装的工艺方法。聚硫密封胶广泛用于土木建筑、汽车制造等行业作为嵌缝、密封材料，还常用于各类油箱、燃料罐、航空机械、复合玻璃的密封。
Generally curable type. Components can be divided into two components (or three components) and a single component type. The process of mixing, grinding and filling is adopted. Polysulfide sealant is widely used in civil construction, automobile manufacturing and other industries as caulking and sealing material, is often used for sealing all kinds of fuel tank, fuel tank, air machine, composite glass.
应用
application
聚硫密封胶适用于中空玻璃密封、金属、混凝土幕墙接缝、地下工程（如隧道、洞涵）、水库、蓄水池等构筑物的防水密封，以及公路路面，飞机跑道等伸缩缝的伸缩密封、建筑物裂缝的修补恢复密封。
Polysulfide sealant for insulating glass sealing, metal, joints, concrete wall underground engineering (such as tunnel, cave), reservoirs, reservoirs and other structures of waterproof sealing, and road repair, restore the telescopic runway expansion joint sealing, sealing the crack of building complex.
注意事项
Matters needing attention
注意事项：
Matters needing attention：
1、 不能与硅硐密封胶掺合使用，否则会影响其粘结性能。
1, it can not be mixed with silicone sealant, otherwise it will affect its bond performance.
2、 施工温度在5℃以上，否则会影响其粘结性和固化速度。
2, construction temperature above 5 degrees, otherwise it will affect the adhesion and curing speed.
3、 施工前做小样试验。
3. Do sample test before construction.
Storage condition:
远离火源，避免通风，温度在5℃～30℃。
Keep away from fire source and avoid ventilation. The temperature is between 5 and 30 degrees centigrade.
使用方法
Usage method
1、手工施工时，将 A 、 B 两组份按比例( 10:1 )称量并用油灰刀混合均匀，填入密封槽中，压实、填平、除去多余的胶液。要注意用力沿一个方向反复刮涂，防止大量气泡混入胶内。
1, manual construction, A, B two groups according to proportion (10:1) weighing and mixing with a putty knife, fill in the sealing groove, compaction, fill, remove excess glue. Should pay attention to force along the direction of repeated scraping, to prevent a large number of bubbles mixed with gum.
2、机械施工时，是由自动计量和混合装置( 10:1 )完成混胶，经手动注枪或全自动喷胶机来控制涂胶量和涂胶速度。用注胶枪施工时要报持枪嘴沿一个方向匀速地移动，确保填满胶料防止移动过快或往复而产生气泡。
2, mechanical construction, is composed of automatic metering and mixing device (10:1) complete mixing, by manual or automatic spray gun injection machine to control the speed of coating and coating. When the glue gun is used, it should be reported that the arms are moved in one direction at a constant speed, so as to ensure that the filling material is filled so as not to move too quickly or to generate bubbles when reciprocating or reciprocating.
用途
purpose
1、用于底盘、车厢外部焊缝的防水防锈保护。
1 、 used for waterproof and antirust protection of the outer welding seam of chassis and carriage.
2、用于顶棚、厢体、地板的金属、木材、塑料、泡沫等材料接缝的粘接和密封。
2, for ceiling, car body, floor of metal, wood, plastic, foam and other materials of the joint bonding and sealing.
3、用于顶棚、厢体、地板的金属板固定螺钉、铆钉的防水及防锈密封等。
3, for ceiling, car body, floor metal plate screws, rivets waterproof and rust prevention, sealing and so on.
